Differences

This shows you the differences between two versions of the page.

--- rhino:legacy_rhino [2020/12/02]
maryfugier [Rhino 6]
+++ rhino:legacy_rhino [2020/12/02] (current)
maryfugier [Rhino 6]
@@ Line 4: / Line 4: @@
 When you upgrade your legacy Rhino to a current version, the new version may not be support some of your plugins, add-ons, scripts, output devices like laser cutters and more.
-For example, users with older lasers that could print directly from **Rhino 5** on Windows 7, but however running the same **Rhino 5** on Windows 10 cannot.
+For example, users with older laser cutters that could print to the device directly out of **Rhino 5** installed on Windows 7, found that the same **Rhino 5** installed Windows 10 could not do this.
-For Rhino 7 of later, you will need a new computer that runs Windows 10 or later for optimum performance.
+For **Rhino 7** or later, you will need a new computer that runs Windows 10 or later for optimum performance.
-//While the older Rhino 4 or 5 software will not run well on your new computer, your newer Rhino 7 or later software will also not run well on your older computer. This is why you need to keep both computers.//
+//While the older **Rhino 4 or 5** software will not run well on your new computer, your newer **Rhino 7** or later software will also not run well on your older hardware. This is why you need to keep both computers.//
 ===== Solution:=====
 ==== Rhino 5 ====
-  * Keep **Rhino 5** on your old computer.
+  - Keep **Rhino 5** on your old computer.
-  * From **Rhino 7**, use the **SaveAs** command to save your files in the // Rhino 5 3DM file// format. (To access the **SaveAs** command on the Mac, go up to **File** menu and hold down the Options key.)
+  - From **Rhino 7**, use the **SaveAs** command to save your files in the // Rhino 5 3DM file// format. //(To access the **SaveAs** command on the Mac, go up to **File** menu and hold down the Options key.)//
-  * Copy this file to your legacy computer.
+  - Copy this file to your legacy computer.
-  * Open in **Rhino 5**.
+  - Open in **Rhino 5**.
@@ Line 23: / Line 23: @@
 However, you can not run **Rhino 6** on one computer, while running **Rhino 7** on another.
-  * Keep Rhino 6 on your old computer.
+  - Keep **Rhino 6** installed on your computer.
-  * From Rhino 7, use the SaveAs command to save your files in the Rhino 6 3DM file format. (To access the SaveAs command on the Mac, go up to File menu and hold down the Options key.)
+  - From **Rhino 7**, use the **SaveAs** command to save your files in the //Rhino 6 3DM file// format. //(To access the SaveAs command on the Mac, go up to File menu and hold down the Options key.)//
-  * Copy the 3DM file to your legacy computer, if required.
+  - Copy the 3DM file to your legacy computer, if required.
-  * Open 3DM in Rhino 5.
+  - Open 3DM in **Rhino 6**.

McNeel Wiki

Site Tools

Differences

Page Tools